Adding Paver Lights Boosts Value and Curb Appeal
Why Adding Paver Lights Elevates Your Hardscape Projects
As a contractor, you strive to deliver projects that surp...
Solar Paver Light 4×4 inch, 5000K Up to 12 Hours of Continuous Lighting, Stainless Steel, Glare-Free for Driveways & Garden, Waterproof & Drive-Over
$64.99
- Innovative solar-powered lighting design (patent pending)
- Distinctive shape with rectangular lighting effect
- up to 12 hours of continuous lighting
- Heavy-Duty stainless steel frame
- Can withstand vehicular traffic.
- Perfect for glowing accents along driveways and pathways.
- Replaces standard 4″ x 4″ pavers ( 3.93 by 3.96 inches )
- 60 led’s for better light spread.
- Waterproof IP68
- 3.7v / 0.2w / 2 lumens
- 5000K Beautiful daylight effect
- 2 Years Warranty
| Color Temperature: 5000K | |
| Fixture Size: 4x4 SOLAR |
Out of stock
Notify Me When Available Again
Description
- Innovative Solar Design & Unique Lighting Effect – Featuring advanced solar panels and a patent-pending square lighting effect, this fixture uses 60 built-in LEDs to add elegance to your outdoor spaces with a crisp daylight (5000K) glow and enhanced light spread.
- High-Performance Battery – Powered by a robust 3.7V / 2600mAh battery, this light delivers up to 12 hours of continuous lighting when fully charged (requires 10 hours of direct sun exposure). Energy-efficient at just 0.2W, it produces a soft, glare-free 2 lumens—ideal for ambiance and safety.
- Waterproof and Anti-Corrosion – With an impressive IP68 waterproof rating, it thrives in harsh weather, floods, and more. Anti-corrosion features ensure consistent performance and rust resistance, guaranteeing long-term durability.
- Versatile Application – Illuminate various outdoor spaces, from driveways and pathways to cozy patios, effortlessly integrating into existing paver installations. Perfect for use in between pavers, inside gravel, or soil.
- Easy Operation – No need for transformers or wiring. Simply press the ON button on the side once to activate the light, and place it in your desired area where it can receive direct sunlight.
- Important Information – Lumengy solar lights require direct sunlight to charge properly. For best performance, ensure the solar panel is exposed and clean. Shade, clouds, or debris may reduce charging effectiveness. The battery is sealed and non-replaceable to maintain waterproof protection.
- 2-Year Warranty – Lumengy stands by the product’s quality with a 2-year replacement warranty and a 30-day return policy for your peace of mind.
- Package Included – One solar-powered paver light and an installation manual.
Additional information
| Weight | 1.2 lbs |
|---|---|
| Dimensions | 5 × 5 × 3 in |
| Fixture Size |
4×4 SOLAR |
| Watts |
0.2 Watts |
| Fixture Color |
Black |
| Fixture Material |
Stainless Steel |
| Lumens |
2 Lumens |
| Voltage |
3.7V |
| Warranty |
2 Years Replacement Warranty |
| Waterproof Rating |
IP-68 |
| Brand |
LUMENGY |
| Color Temperature |
5000K |
Reviews (1)
1 review for Solar Paver Light 4×4 inch, 5000K Up to 12 Hours of Continuous Lighting, Stainless Steel, Glare-Free for Driveways & Garden, Waterproof & Drive-Over
Installation
LUMENGY PAVER LIGHTS INSTALLATION INSTRUCTIONS
Before installing paver lights, you will need:
1. A 12V landscape transformer to power all your lights, with enough watts to support the total wattage of all your lights plus an additional 50% for efficiency. For example, if your lights have a total wattage of 100, purchase a 150W transformer.
2. Main low voltage cable, which runs from the transformer to the last light in your line. Use a thick cable, such as 10/2, 12/2, or 14/2 (10/2 is the thickest). Each paver light comes with a 6-foot lead wire to connect to the main line. If the lead wire is not long enough, use 16/2 or 14/2 wire to extend it to the main line.
3. Waterproof wire connectors or electrical tape to connect the lights to the main low voltage line.
Here are some steps to follow when installing paver lights
1. Plan the light placement before you start laying new pavers, and mark the location of the lights if you have existing pavers.
2. Remove the pavers where the lights will go, and lay wires along the path of the lights. Make sure to bury the wires under walls, and add sand or gravel under the fixtures to keep them secure.
3. Install the light fixtures in the holes where the pavers were removed, or dig new holes for the fixtures and wiring.
4. Connect the main low voltage line to each light using waterproof connectors. Then, connect the line to a low voltage landscape transformer (12V AC/DC).
5. Test the lights to ensure that they are working properly.
6. Fill the holes with dirt or sand and pack it down firmly to secure the lights both below and on the sides.
7. Enjoy the beautiful and energy-efficient lighting!
Replacement:
To replace the paver light, start by turning off the power supply to the circuit from the main breaker or switch. Gently remove the old paver light with a pry bar, being careful not to damage the surrounding pavers or the electrical cable. Next, cut the wire cable and connect a new light. Ensure that you add the necessary amount of sand beneath the new light to level it with the rest of the paver.
Shipping & Delivery
SHIPPING & DELIVERY
- We process and ship orders Monday through Friday from multiple warehouses across the US.
- Free expedited shipping is offered, with an estimated delivery time of 2-4 days.
- For large orders, please allow an additional 3-4 days for delivery.
- Multiple packages may be shipped for certain orders.
- If you are planning to place a large order of 50 items or more, please contact us beforehand.
- You can easily track your shipment and view your purchase history in your account section.
- Shipping and tracking information will be emailed to you within 24 hours.
- If you have any questions, please feel free to reach out to us.
ASK A QUESTION
Ben solero –
Beautiful light
Last almost all night,