- Innovative Solar Design – Lumengy 6×9 Solar Paver Light showcases advanced solar panels for quick charging and extended illumination.
- Distinctive Shape and Unique Lighting Effect – Its patent-pending rectangular lighting effect brings elegance to outdoor spaces, emitting a bright warm white (2700K) glow.
- High-Performance Largest Battery Capacity – Powered by two redundant 2600mAh batteries, this solar light offers a total capacity of 5200mAh, providing up to 20 hours of continuous lighting when fully charged.
- Durable & Built to Last – Crafted with a robust stainless steel frame and thick frosted tempered glass, this light can withstand challenging conditions, including vehicular traffic. Sized at 5.82 inches by 8.85 inches, it seamlessly integrates into existing paver installations.
- Waterproof and Anti-Corrosion – With an IP68 waterproof rating, it thrives in harsh weather, while anti-corrosion features ensure consistent performance and rust resistance.
- Easy Installation – Activate the switch located beneath the unit, eliminating the need for complicated wiring. The simple installation process requires only basic tools and a little know-how, ensuring a hassle-free solution for all your outdoor lighting needs.
- Versatile Application-Illuminate a variety of outdoor spaces, from pathways and driveways to cozy patios. The Lumengy 6×9 Solar Paver Light seamlessly integrates into your existing paver installations. Just replace a standard 6×9 paver with this light to instantly enhance the aesthetic appeal and safety of your outdoor areas.
- Important Information: Upon arrival, the battery is approximately 80% charged, allowing you to start using the light right away. For optimal performance and extended lighting duration, ensure that the unit is exposed to direct sunlight. Please note that the light’s design is sealed, and the battery is not replaceable. Over time, battery performance may naturally decline. To maintain maximum efficiency, periodically clean the surface of the light to prevent dirt and debris from obstructing the solar panel.
- 2-Year Warranty – Lumengy offers a 30-day return policy and a 2-year replacement warranty. Contact us for any replacement needs.
- Package Included – One solar-powered paver light, activation pin, and a manual for easy installation.
Solar Paver Light 6×9 inch, Up to 20 Hours of Continuous Lighting, Stainless Steel, Glare-Free for Driveways & Garden, Waterproof & Drive-Over
- Innovative solar-powered lighting design (patent pending)
- Distinctive shape with rectangular lighting effect
- up to 20 hours of continuous lighting
- Heavy-Duty stainless steel frame
- Can withstand vehicular traffic.
- Perfect for glowing accents along driveways and pathways.
- Replaces standard 6″ x 9″ pavers (5.82 inch X 8.85 inch)
- 232 led’s for better light spread.
- Waterproof IP68
- 5.7v / 0.5w / 15 lumens
- 2700K Beautiful Warm White
- 2 Years Warranty
|Fixture Size: 6x9 - SOLAR|
|Dimensions||6 × 9 × 2.2 in|
6×9 – SOLAR
2 Years Replacement Warranty
LUMENGY PAVER LIGHTS INSTALLATION INSTRUCTIONS
Before installing paver lights, you will need:
1. A 12V landscape transformer to power all your lights, with enough watts to support the total wattage of all your lights plus an additional 50% for efficiency. For example, if your lights have a total wattage of 100, purchase a 150W transformer.
2. Main low voltage cable, which runs from the transformer to the last light in your line. Use a thick cable, such as 10/2, 12/2, or 14/2 (10/2 is the thickest). Each paver light comes with a 6-foot lead wire to connect to the main line. If the lead wire is not long enough, use 16/2 or 14/2 wire to extend it to the main line.
3. Waterproof wire connectors or electrical tape to connect the lights to the main low voltage line.
Here are some steps to follow when installing paver lights
1. Plan the light placement before you start laying new pavers, and mark the location of the lights if you have existing pavers.
2. Remove the pavers where the lights will go, and lay wires along the path of the lights. Make sure to bury the wires under walls, and add sand or gravel under the fixtures to keep them secure.
3. Install the light fixtures in the holes where the pavers were removed, or dig new holes for the fixtures and wiring.
4. Connect the main low voltage line to each light using waterproof connectors. Then, connect the line to a low voltage landscape transformer (12V AC/DC).
5. Test the lights to ensure that they are working properly.
6. Fill the holes with dirt or sand and pack it down firmly to secure the lights both below and on the sides.
7. Enjoy the beautiful and energy-efficient lighting!
To replace the paver light, start by turning off the power supply to the circuit from the main breaker or switch. Gently remove the old paver light with a pry bar, being careful not to damage the surrounding pavers or the electrical cable. Next, cut the wire cable and connect a new light. Ensure that you add the necessary amount of sand beneath the new light to level it with the rest of the paver.
SHIPPING & DELIVERY
- We process and ship orders Monday through Friday from multiple warehouses across the US.
- Free expedited shipping is offered, with an estimated delivery time of 2-4 days.
- For large orders, please allow an additional 3-4 days for delivery.
- Multiple packages may be shipped for certain orders.
- If you are planning to place a large order of 50 items or more, please contact us beforehand.
- You can easily track your shipment and view your purchase history in your account section.
- Shipping and tracking information will be emailed to you within 24 hours.
- If you have any questions, please feel free to reach out to us.